User's Manual

The higher percentage shown in the bar, the more radio signal been received by the adapter.
This indicator helps to find the proper position of the wireless device for quality network
operation.
Noise Level: Display the noise level in the wireless environment.
1.2.3 Site Survey
When you open the Configuration Utility, the system will scan all the channels to find all
the access points/stations within the accessible range of your adapter and automatically
connect to the wireless device with the highest signal strength.
From the “Site Survey”, the entire network nearby will be listed. You can change the connection
to another network or add one of the networks to your own profile list.
Definition of each field:
SSID -> Name of BSS of IBSS network
BSSID -> Name of BSS of IBSS network
Signal -> Receive signal strength of specified network
Channel -> Channel in use
Encryption -> Encryption algorithm used within than BSS or IBSS. Valid value includes
WEP, TKIP, AES, and Not Use
Authentication->Authentication mode used within the network, including Unknown,
WPA-PSK, WPA2-PSK, WPA and WPA2
Network Type-> Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
Connected network:
: This icon indicates the change is successful.
When RaConfig first ran, it will select the best AP to connect automatically.
If user wants to connect to other AP, He can double click mouse on the intended AP to
make connection.
If the intended network has encryption other than “ Not Use ”, RaConfig will bring up
the security page and let use input the appropriate information to make the connection.