802.11g Wireless LAN SiP Module (WM-BG-MR -01) Data Sheet Apr 28’th. 2005 Rev 2.2 www.usi.com.tw PRODUCT SPECIFICATION of 802.11g WM-BG-MR -01 B2B Wireless Lan +BT Combo Module All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
802.11g Wireless LAN+BT SiP combo Module V2.2 Introduction The 802.11 Wireless SiP module WM-BG-MR-01 which refers as “SiP-g combo module” is a small size module that provides full function of 802.11g/b and Bluetooth class 2 on a tiny module via 60 pins board to board connector. This multi- functionality and board to board physical interface provides 16 bit PC Card /CF+ bus interface for WiFi and UART for Bluetooth.
802.11g Wireless LAN+BT SiP combo Module V2.2 1. EXECUTIVE SUMMARY The WM-BG-MR-01 module - is one of the product families in USI’s product offering, targeting for system integration requiring a smaller form factor. It also provides the standard migration to high data rate to USI’s current SIP customers. The WM-BG-MR-01 module providing B to B type connector is provided as option for customers, who want to have Board to board type assembly.
802.11g Wireless LAN+BT SiP combo Module V2.2 3. REFERENCE DOCUMENTS C.I.S.P.R. Pub. 22 "Limits and methods of measurement of radio interference characteristics of information technology equipment." International Special Committee on Radio Interference (C.I.S.P.R.), Third Edition, 1997. CB Bulletin No. 96A "Adherence to IEC Standards: “Requirements for IEC 950, 2nd Edition and Amendments 1 (1991), 2(1993), 3 (1995) and 4(1996). Product Categories: Meas, Med, Off, Tron.
802.11g Wireless LAN+BT SiP combo Module V2.2 . COMPATIBILITY AND INTEROPERABILITY 4. 4.1. WI-FI LOGO The product needs to be verified with Wi-Fi certification base on CF form factor to prove the hardware compatibility. For the other specific application, Wi-Fi certification is dependent on the capability and application of the host system. 4.2. WHQL COMPLIANCE Not required for WM-BG-MR-01 module 5. CONFIGURABILITY No user configuration needed.
802.11g Wireless LAN+BT SiP combo Module V2.2 Final certification (module certification) requires the antenna of targeted system with a leadtime of 6 weeks. The product deliverable shall be a pre-tested WM-BG- MR-01 module. No module level certification on WM-BG-MR-01 module. 9.1. EMC The module will be pre-tested to ensure that we can certify the product in the following countries when final certification will be performed on products and or platforms. • • • • • • • US.
802.11g Wireless LAN+BT SiP combo Module V2.2 WIRING: Any wiring material, if used, shall be UL Recognized Component Appliance Wiring Material (AVLV2). Wire shall be minimum rated 30V, 105°C. PLASTIC PARTS - Any plastic parts used shall be molded of plastics that are UL "Recognized" (QFMZ2) and rated UL 94V-2 or less flammable when tested to UL 94. “PB FREE” - The entire component Suppliers has to support Green requirement base on USI’s policy.
02.11g Wireless LAN+BT SiP combo Module V2.2 9.5.
802.11g Wireless LAN+BT SiP combo Module V2.2 10.1. HOST INTERFACE The host interface will be compatible with CompactFlash (PCMCIA) standard, 16 bit I/O bus. Signals which are not used won’t be routed to the physical interface (connector). The host interface of Combo SiP Bluetooth portion is compliant with UART interface, the default baud rate setting is 115.2kbps and the optional range is from 9.6kbps to 921.6kbps. On Board connector Molex 53794-0608 or 55560-0607 Datasheet_Molex_53 794-0608.
802.11g Wireless LAN+BT SiP combo Module V2.2 3 D04 HD4 4 D05 HD5 5 D06 HD6 6 D07 HD7 7 -CE_1 HCE1_B 8 A10 A10 9 -OE HOE_B 10 A09 HA9 11 A08 HA8 12 A07 HA7 13 VCC VCC_WLAN 14 A06 HA6 15 A05 HA5 16 A04 HA4 bus. HD[15:0] are used to access the MODULE MAC Host Interface register Data Input/Output line constitute a bi-directional bus. HD[15:0] are used to access the MODULE MAC Host Interface register Data Input/Output line constitute a bi-directional bus.
802.11g Wireless LAN+BT SiP combo Module V2.2 17 A03 HA3 18 A02 HA2 19 A01 HA1 20 A00 HA0 21 D00 HD0 22 D01 HD1 23 D02 HD2 24 -IOIS16 IOIS16_B 25 -CD2 CD2 26 N/A TXD_B within MAC. This address range is mainly used for accessing the CIS in Memory Mode. Signal HA0 is not used in word access mode. ADDRESS BUS lines driven by the host system which enables addressing of 0.5K address range within MAC . This address range is mainly used for accessing the CIS in Memory Mode.
802.11g Wireless LAN+BT SiP combo Module V2.2 34 D08 HD8 IO, PD, 5VT, 4mA HRESET Data Input/Output line constitute a bi-directional bus. HD[15:0] are used to access the MODULE MAC Host Interface register STATUS CHANGE indication to the host. This signal gets active when one of the bits in the PRR or CSR registers are set Reserved for BT portion , keep its open on host side if no use.
802.11g Wireless LAN+BT SiP combo Module V2.2 54 D11 HD11 IO, PD, 5VT, 4mA RXD_B Data Input/Output line constitute a bi-directional bus.
802.11g Wireless LAN+BT SiP combo Module V2.2 10.2.3. BLUETOOTH INTERFACE There are interfaces signal to routed between WiFi and Bluetooth to provide coexistence with 802.15 Bluetooth modules. The BT co-existence interface supported, which is 2 Wire CSR co-existence.
802.11g Wireless LAN+BT SiP combo Module V2.2 12. HUMAN FACTORS Due to the nature of this product (embedded module) no human factors required 13. INDUSTRIAL DESIGN Due to the nature of this product (embedded module) no industrial design requirements are required. 14. RELIABILITY The WM-BG-MR-01 module guarantee an MTBF of 150,000 hrs based on an ambient temperature and workload of 2,920 hours. The workload is based on a unit working for 8 hours per day, 365 days per year.
