User's Manual

SmarTerminal® |Fully rugged TiTAN T8
47
47
Leader in RF Technology
temperature.
Make sure that the battery pack is installed correctly.
Make sure that the battery terminals are clean.
Troubleshooting for Bluetooth problem
Symptom
I cannot connect to another device with Bluetooth wireless technology.
Possible Remedy:
Make sure that both devices have activated Bluetooth feature.
Make sure that the distance between the two devices are not over 10 meters or that there are no walls or other
obstructions between the devices.
Make sure that the other device is not in “Hidden” mode.
Make sure that both devices are compatible.
Troubleshooting for Display Problem
Symptom
Nothing appears on the screen.
Possible Remedy:
During operation, the screen may automatically turn off as a result of power management. Press any key to see if the
screen comes back.
The brightness level might be too low. Increase brightness by pressing the button.
Troubleshooting for Date/Time Problems
Symptom
The date/time is incorrect.
Possible Remedy:
Correct the date and time via the operating system or BIOS Setup program.
After you have performed everything as described above and still have the incorrect date and time every time you
turn on the TiTAN T8, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace
the RTC battery.
Troubleshooting for Sound Problems
Symptom 1
No sound is produced.
Possible Remedy:
Make sure that the volume control is not set too low.
Increase volume by pressing the button.
Make sure that the TiTAN T8 is not in Standby mode.
If using an external speaker, make sure that the speaker is properly connected.
Symptom 2
Distorted sound is produced.
Possible Remedy:
Make sure that the volume control is not set too high or too low.
In most cases, a high setting can cause the audio electronics to distort the sound.
Symptom 3