User's Manual Part 2

CONFIDENTIAL Page 35 2004/8/20
1) After connecting wireless LAN equipment, install a driver. And then, the Wireless network
connection icon appears in Task Bar. Click the icon with the right button of the touch-pad, and
click the list of available wireless networks
2) Select a network name (access point) you want to access from the list of available wireless
networks, and then click Connect. After a while, it is connected to an AP-connected network
group.
(To access a network in other OS tablet PCs)
In order to use a wireless LAN card in other OS s except Windows XP, install a wire
less LAN Client manager program, and then set up a network condition.
Wireless LAN Client Manager Program Installation
1) After clicking Start>Run, click Search , and select a program location. Click Confirm.
2) Complete the installation according to the guide of the screen.
Setting up a network condition
1) Click the Client manager icon on Task Bar to run a manager program.
(Caution) To check out the network access
status,
drag the mouse to the wireless network
connection icon on Task Bar. Then, the
access status appears. If encryption is set
to the AP you want to access select the
network name under encryption. Then a
network key can be activated. If you input a
network key to the selected AP, it is
available to use a wireless network securely.
Consult a person in charge of wireless
network management for a network key to
AP. (Setting up an AP encryption is
managed by an AP management program)