User's Manual Part 1

CONFIDENTIAL Page 20 2004/8/20
4) If you calibrate the touch panel in
SMARTTABLET, click “Calibration”
button.
5) First point should be touched in 1~
2 second and then “Calibration first
point success” Box would come
out, if you do calibrate correctly.
Second point should be done in
same way.
Note : Push “Ctrl + Tab” Key in
SMARTTABLET, if the touch
panel doen’t work correctly.
6) If you’d like to test touch position or
status, Click “Draw” button and then
check them.
Second point
First point