User's Manual

Leader In Mobile
15
5. Installing the SmartNL-RF2000
This section explains how to choose a mounting location for the SmartNL-RF2000
1) Choosing a Mounting Location
You can mount the SmartNL-RF2000 to a wall or a beam using the mounting holes
2) Connecting Cables
2-1) Connect LAN cable to main body LAN port for Ethernet communication.
Connect data cable for serial communication checking with right direction
of the connecter.
Connect adapter with power supply code then connect adapter jack to main body.
2-2) Connecting External Antenna Cable (optional)
If the SmartNL-RF2000 was purchased with external antenna
connector option, screw the connector of the antenna cable.
Antenna cable on the appropriate antenna attachment of the case.
Hand tighten the connector (do not use vice grips for this job).
When tying the coaxial cable, make sure no water can get into it and/or into the
equipment it is attached to.
Note: do not bend the cable straight: you should keep a radius of curvature allowing the
cable to bend without applying force.
Mounting Hall
Ex) Push Pull type connector