User's Manual

Leader In Mobile

4-1. LED Indicators

LED Description

ANT1 ON: Antenna1 Connected / OFF: Not Connected.

ANT2 ON: Antenna2 Connected / OFF: Not Connected.

ANT3 ON: Antenna3 Connected / OFF: Not Connected.

ANT4 ON: Antenna4 Connected / OFF: Not Connected.

NETWORK ON: Network connected between Reader and HOST PC / OFF : Not Connected

DATA Blinking: Successful tag read/ OFF: Not working

ERROR ON: Error condition / OFF : Normal

POWER ON: Turn On / OFF: Turn Off

4-2. Ports

Port Description

Power Connect the SmarTerminal approved power supply.

LAN

Insert a standard RJ45 Ethernet cable for connection to an Ethernet network. Insert a cross-

connect Ethernet cable for connection to a local PC

Data

Data port have RS-232 and GPIO

RS232 Connection to a local PC

GPIO connection to an external device.

Antenna

Support up to 4 antenna / Connector type is TNC.

If you use an antenna switching at the same time, and Acts as a sequential