User's Manual
Table Of Contents
- Cover page
- Disclaimer
- Table of contents
- Introduction
- Chapter 1 Get to know more about SmartCompact
- Chapter 2 Hot keys
- Chapter 3 Power settings and connections
- Chapter 4 Operation modes
- Chapter 5 Resetting SmartCompact
- Chapter 6 Configuring SmartCompact
- Chapter 7 Applications and operations
- Chapter 8 Accessories and peripheral devices
- Chapter 9 PC Interface
- Appendix A SmartCompact specification highlights
- Untitled
Page 38 11/30/2006
Start > Program > Run wordpad Scan start > Scanned barcode data will get copied to
wordpad
7.4 Blueman application program
Blueman supports Bluetooth 1/2 and Blueclass 2 (10 mW) specifications.
Note :
• Maximum only two services can be connected (SPP and FTP, ActiveSync and FTP)
• SPP and ActiveSync can not be connected simultaneously since they use the same
outbound port
• While both SPP and FTP are in use the service search might not be available.
• Whereas the part which is saved automatically in setting is shown in red and others are
saved by closing the setting form.
• The class of device of PDA which installs Blueman is applied to Handheld PDA in service
on.
7.4.1 Bluetooth application status
- There are 3 types of Bluetooth status; Off, On, Connection
- You can check the current status of Bluetooth in the tray icon as shown below
User interface Status
Bluetooth Radio Off : Inactive
Gray color
Bluetooth Radio On : Active
Blue color
Bluetooth connection: In use
Green color