User's Manual
Table Of Contents
- Cover page
- Disclaimer
- Table of contents
- Introduction
- Chapter 1 Get to know more about SmartCompact
- Chapter 2 Hot keys
- Chapter 3 Power settings and connections
- Chapter 4 Operation modes
- Chapter 5 Resetting SmartCompact
- Chapter 6 Configuring SmartCompact
- Chapter 7 Applications and operations
- Chapter 8 Accessories and peripheral devices
- Chapter 9 PC Interface
- Appendix A SmartCompact specification highlights
- Untitled
Page 17 11/30/2006
Chapter 4 Operation modes
4.1 Normal mode
In normal mode all functions will be available and SmartCompact will be active.
4.2 Suspend mode
In suspend mode SmartCompact will look, as if it is turned off.
SmartCompact can be put in suspend mode in following ways:
1 Holding down the power key for 3 seconds, when it is on.
2 If main battery fails.
Note : If SmartCompact is not operated for specified period it can be switch to suspend
mode, this time can be set as follows
Start > settings > control panel > power properties > schemes > battery power
SmartCompact can be put back in active mode in following ways:
1 One press of power button, when SmartCompact unit is off.
2 By putting it in powered docking station.
3 By replacing the batteries with charged ones and press power button.