User Manual

MiniStation All-in-One Petit Board User’s Manual

PCMCIA Card

Two beeps and the configured I/O range & IRQ agree with the I/O range & IRQ assignment of your

network software, but network software does not work fine-------The configured I/O range or IRQ might

conflict with which other device use in your PC. Please refer to section Using CSALLOC at Chapter 2 and

Customizing your System at Chapter 5 in CardSoft User’s Guide.

The client drive supported by LAN card vendor configure fail---- Please refer to section Using

CSALLOC at Chapter 2 and Customizing your System at Chapter 5 in CardSoft User’s Guide, check if

there is system resource for the client driver to configure your LAN card

7.4.6 Other card

Please refer to trouble shooting of LAN card

NOTE: For those who need special utilities for Reading/Writing memory card(SRAM or FLASH) or

more information about the function of Booting from memory card, please refer to README.TXT

which is located in the UTILITY subdirectory on supplied diskette from a distributor of the

MiniStation.