User Manual

MiniStation All-in-One Petit Board User’s Manual
Award BIOS Setup
79
7.2 Software Installation
The PCMCIA Card Drive includes a DOS PCMCIA services library CardSoft, manufactured by SystemSoft.
It also comes with CardView, a PCMCIA control & maintenance utility for Microsoft Windows. It works
together with Cardsoft allowing you to configure and control our PCMCIA cards easily while in Windows.
But Window 95/98 does not require CardSoft and CardView.
7.2.1 Installation for Windows 95 and 98
Windows 95/98 contains the built-in support utility driver for this PCMCIA Card Drive and do not require the
supplied drive diskette for the DOS.
Though the utility driver is already installed in a hard drive in the MiniStation, you may need to re-install
yourself.
To install the necessary utilities from the Windows 95/98 in a CD-ROM drive directly, the CN4
connector in the main board can be used. An IDE type CD-ROM drive is to be connected to the CN4
which is the second IDE connector port on the main board and the necessary utility software is to
be loaded into a hard drive.
Or you probably need to install the Windows and operating system yourself.
When you install your hardware at the first time, please follow the below procedure :
1. Follow the Windows operation procedure as below :
START Æ SETTINGS ÆCONTROL PANEL, and double click on ADD NEW HARDWARE.
Then Add New Hardware prompt is displayed.
2. Double Click on PCMCIA socket, the manufactures & model prompt is displayed. Then double
click on PCIC or compatible PCMCIA controller. the Resource type & Setting prompt is
displayed.
3. Click on Next and then click on Finish, then System Settings Change prompt is displayed.
4. Click on Yes to rebooting Windows systems. Then the utility driver installation into a hard drive is
completed.
For more information, refers to the manual of Window 95/98 or its on line help.