User Manual

MiniStation All-in-One Petit Board User’s Manual
Award BIOS Setup
47
5.6 BIOS Features Setup Menu
ROM PCI/ISA BIOS (2A69KA5C)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Video BIOS Shadow : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled
D8000-DBFFF Shadow : Disabled
DC000-DFFFF Shadow : Disabled
******** SmartView Function ********
LCD Type : 640 x 480 TFT
TFT Format: 24 Bits
DSTN Format: 24 Bits
Expansion(Full Screen) : Disabled
Display Type at POST/BOOT : LCD only
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC
Checking
Processor Number Feature
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate(Chars/Sec)
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select for DRAM >64MB
Report No FDD For WIN 95
: Disabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: A,C,SCSI
: Disabled
: Enabled
: On
: Normal
: Disabled
: 6
: 250
: Setup
: Disabled
: Non-OS2
: No
ESC : Quit ↑ ↓ → ←: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
z Virus Warning
This option flashes on the screen. During and after the system boot up, any attempt to write to the boot sector or
partition table of the hard disk drive will halt the system with the following message. You can run an anti-virus
program to locate the problem. The default setting is “Disabled”.
! WARNING !
Disk boot sector is to be modified
Type "Y" to accept write or "N" to abort write
Award Software, Inc.
Enabled
Activates automatically when the system boots up
causing a warning message to appear when there
is an attempt to access the boot sector or hard disk
partition table.
Disabled
No warning message will appear when attempts to
access the boot sector or hard disk partition table
are made.
NOTE: This function is only available with DOS and other operating systems that do not trap INT13.
z CPU Internal Cache/External Cache
These two options speed up memory access. However, it depends on the CPU/chipset design. The default setting
is “Enabled”. CPUs with no built-in internal cache will not provide the “CPU Internal Cache” item on the menu.
Enabled
Enable cache
Disabled
Disable cache
z CPU L2 Cache ECC Checking
When enabled, this allows ECC checking of the CPU’s L2 cache. By default, this field is Enabled.
z Quick Power On Self Test
This option speeds up Power On Self Test (POST) after you turn on the system power. If set as Enabled, BIOS
will shorten or skip some check items during POST. The default setting is “Enabled”.