User Manual

MiniStation All-in-One Petit Board User’s Manual
Award BIOS Setup
91
1) After connecting wireless LAN equipment, install a driver. And then, the Wireless network connection
icon appears in Task Bar. Click the icon with the right button of the touch-pad, and click the list of
available wireless networks
2) Select a network name (access point) you want to access from the list of available wireless networks,
and then click Connect. After a while, it is connected to an AP-connected network group.
(To access a network in other OS tablet PCs)
In order to use a wireless LAN card in other OS s except Windows XP, install a wire less LAN
Client manager program, and then set up a network condition.
Wireless LAN Client Manager Program Installation
1) After clicking Start>Run, click Search , and select a program location. Click Confirm.
2) Complete the installation according to the guide of the screen.
Setting up a network condition
(Caution) To check out the network
access status,
drag the mouse to the wireless
network connection icon on Task Bar.
Then, the access status appears. If
encryption is set to the AP you want to
access select the network name under
encryption. Then a network key can be
activated. If you input a network key to
the selected AP, it is available to use a
wireless network securely. Consult a
person in charge of wireless network
management for a network key to AP.
(Setting up an AP encryption is
managed by an AP management
program)