User Manual

MiniStation All-in-One Petit Board User’s Manual

Award BIOS Setup

AWARD SOFTWARE, INC.

ACPI function : Disabled ** Reload Global Timer Events **

Power Management : User Define IRQ[3-7,9-15],NMI : Disabled

PM Control by APM : Yes Primary IDE 0 : Disabled

Video Off Method : V/H SYNC+Blank Primary IDE 1 : Disabled

Video Off After : Standby Secondary IDE 0 : Disabled

Modem Use IRQ : 3 Secondary IDE 1 : Disabled

Doze Mode : Disable Floppy Disk : Disabled

Standby Mode : Disable Serial Port : Enabled

Suspend Mode : Disable Parallel Port : Disabled

HDD Power Down : Disable

Throttle Duty Cycle : 62.5%

PCI/VGA Act-Monitor : Disabled

Soft-Off by PWR-BTTN : Instant-Off

PowerOn by Ring : Enabled

IRQ 8 Break Suspend : Disabled ESC: Quit ↑↓→←: Select Item

F1 : Help PU / PD / + / - : Modify

F5 : Old Values (Shift)F2 : Color

F6 : Load BIOS Defaults

F7 : Load Setup Defaults

z ACPI Function

This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). The options

available are Enabled, Disabled.

z Power Management

This option allows you to select the type (or degree) of power saving for Doze, Standby, and Suspend modes.

The table below describes each power management mode: