Specifications

1 800 561 5885
|
www.samlexamerica.com |
301 800 561 5885
|
www.samlexamerica.com |
30
Innovative Power Conversion Products Since 1991
|
29
RS-100-12
Industrial Switching Power Supplies - RS, SE & SD Series
Model Input
(VAC)
Output
(VDC)
Amps
(A)
Weight
(lbs)
Dimensions
(inches)
RS-25-12 88-264 12 2.1 0.44 3.07 x 2.01 x 1.10
RS-50-12 88-264 12 4.2 0.90 3.90 x 3.82 x 1.42
RS-100-12 88-264 12 8.5 1.32 6.26 x 3.82 x 1.50
RS-150-12 88-132* 12 12.5 1.54 7.83 x 3.86 x 1.50
SE-350-12 90-132* 12 29.0 2.36 8.46 x 4.53 x 1.97
RS-25-24 88-264 24 1.1 0.44 3.07 x 2.01 x 1.10
RS-50-24 88-264 24 2.2 0.90 3.90 x 3.82 x 1.42
RS-100-24 88-264 24 4.5 1.32 6.26 x 3.82 x 1.50
RS-150-24
88-132* or
176/264* 24 6.5 1.54 7.83 x 3.86 x 1.50
SE-350-24 90-132* 24 14.6 2.36 8.46 x 4.53 x 1.97
SE-600-48 120/230* 48 12.5 5.0 9.7 x 5.0 x 2.5
SE-1000-48 120/230* 48 20.8 6.0 10.95 x 5.0 x 2.5
* Switch Selectable
DESIGN FEATURES
- Universal or switch selectable AC voltage
- Protections: short circuit, overload/over voltage
INDUSTRIAL DC-DC ISOLATED CONVERTERS
- 2:1 and 4:1 wide input range available
- Protections: short circuit, overload/over voltage
OEM APPLICATIONS
Communication systems
Security systems
Test equipment
GPS receivers
COMPLIANCE
Safety Listed to UL 60950-1 as UL recognized component (Power
Supplies); CE; FCC Part 15(B), Class B (DC-DC Isolated Converters)
2 YEAR WARRANTY
OEM Industrial Power
Supplies & Converters
RS, SE, SD & RCP SERIES
The RS, SE, SD & RCP Series of industrial power supplies and
converters are designed for OEMs.
UL component approval ensures these products are ready
to be used as a component in the production of your UL
Listed product.
RCP SERIES
Expandable 19” 1 RU rackmount power
supplies from 1000 - 8000W. Full range
universal AC input modules operate in a
wide temperature range, are Power Factor
Corrected (PFC), and hot swappable. Up to
3 modules have active current sharing, and
up to 3 full racks can be paralleled.
DC-DC Isolated Converters - Industrial OEM
Model
SD Series
Input
(VDC)
Output
(VDC)
Amps
(A)
Weight
(lbs)
Dimensions
(inches)
SD-150D-12 72-144 12 12.5 1.8 8.0 x 4.5 x 2.25
SD-150C-12 36-72 12 12.5 1.8 8.0 x 4.5 x 2.25
SD-150C-24 36-72 24 6.25 1.8 8.0 x 4.5 x 2.25
SD-150B-24 19-36 24 6.25 1.8 8.0 x 4.5 x 2.25
Rackmount Power Supplies - RCP Series
Model
SD Series
Input
(VDC)
Output
(VDC)
Amps
(A)
Weight
(lbs)
Dimensions
(inches)
RCP-1000-24C 90-264 24 40 4.21 11.61 x 5.00 x 1.61
RCP-1000-48C 90-264 48 21 4.21 11.61 x 5.00 x 1.61
RCP-1UI n/a n/a n/a 24.25 19.04 x 13.81 x 1.73
RCP1UT n/a n/a n/a 24.25 19.04 x 13.81 x 1.73
DC-DC Step-Down
Converters
SDC SERIES
The SDC Series DC-DC converters are non-isolated
and meant for use in negative ground systems. These
converters are designed for heavy duty applications.
DESIGN FEATURES
- Advanced switch mode design
- Mount in almost any location
- Compact and light weight
- High efciency
- Cycle by cycle current limiting circuit
- Over voltage protection
- Short circuit protection
- Reverse polarity protection
APPLICATIONS
Earth moving equipment
Heavy trucks
Buses
Marine
Two-way radios
12 Volt lighting systems
AM/FM sound systems
Instrumentation
COMPLIANCE CE, RoHS (except SDC-15 & SDC-23)
2 YEAR WARRANTY
SDC-23
DC-DC Step-Down Converters - SDC Series
Model
Input
(VDC)
Output
(VDC)
Amps
(A)
Weight
(lbs)
Dimensions
(inches)
SDC-5 20-32 13.8 5.0 0.4 3.5 x 2.7 x 1.9
SDC-12 20-32 13.8 12 0.6 3.9 x 2.7 x 1.9
SDC-15 20-35 13.8 12 2.0 7.8 x 4.8 x 2.4
SDC-23 20-35 13.8 20 2.2 7.8 x 4.8 x 2.4
SDC-30 20-32 13.8 30 1.5 5.9 x 3.5 x 1.9
SDC-60 20-32 13.8 60 2.6 7.5 x 3.5 x 3.6
DC-DC Converters
can be used to:
1. Step-Down voltages where the
output voltage is lower than the
input voltage.
2. Step-Up voltages where the output
voltage is higher than the input
voltage.
3. Stabilize voltages where the nominal
input voltages and output voltages
are the same.