Owner manual

2
2. It consists of a sensing element that is embedded in the ring terminal
• (1,Fig1).Thissensorisattachedto10metersoftwowire,colorcoded
 cable(4,Fig1).Thecableispolarizedi.e.redwirehasPositivepolarity
 andtheblackwirewithredstripehasNegativepolarity.Theotherends
 ofthewires
 • (2,3,Fig1)arebareandarerequiredtobeconnectedtotheterminals
 onthechargecontrollermarkedBTS+andBTS–(Fig2).
3. DetailedoperationoftheBatteryTemperatureSensorisfurtherexplainedin
theOwner’smanualfortheChargeControllerModelNo.SCC-30AB
InstallatIon
Connect the wires of the Temperature Sensor here.
Fig2WiringconnectionsonthebackoftheChargeControllerModelNo.SCC-30AB
Note:Voltagesshownbelowarefor12Vbattery.
For24Vbattery,multiplythesevoltagesby2.