Owner manual

Owner's

Manual

Forusewithsolar

charge controller

ModelNo.:

SCC-30AB

Battery Temperature

Sensor

Model

DC-BTS-A-C

GEnERal DEsCRIPtIon anD FEatUREs

1. BatteryTemperatureSensorModelNo.DC-BTS-A-C(Fig1)isdesignedfor

usewithSamlexSolarChargeControllerModelNo.SCC-30AB.Itsensesthe

temperatureofthebatteryinstallationandsendsthisinformationtothe

ChargeController,whichautomaticallyadjustsitsvoltagetoensureproper

batterychargingdependingontheambienttemperatureofthebattery

installation.

Fig.1ComponentsofBatteryTemperatureSensor

   1. Ringterminalwithembeddedsensor

   2. BarePositive(+)end(Redwire)

   3. BareNegative(-)end(Blackwirewithredstripe)

   4. 10Metersoftwowirecolorcodedcable

    • Positivewire-Red

    • Negativewire-Blackwithredstripe

PAGE 1
Battery Temperature Sensor Owner's Manual For use with solar charge controller Model No.: SCC-30AB Model DC-BTS-A-C GENERAL DESCRIPTION AND FEATURES 1. Battery Temperature Sensor Model No. DC-BTS-A-C (Fig 1) is designed for use with Samlex Solar Charge Controller Model No. SCC-30AB.
PAGE 2
. 3. It consists of a sensing element that is embedded in the ring terminal • (1, Fig 1). This sensor is attached to 10 meters of two wire, color coded cable (4, Fig 1). The cable is polarized i.e. red wire has Positive polarity and the black wire with red stripe has Negative polarity. The other ends of the wires • (2, 3, Fig 1) are bare and are required to be connected to the terminals on the charge controller marked BTS+ and BTS– (Fig 2).
PAGE 3
4. This ring terminal should be mounted on a terminal post of a battery in a bank. • Switch off all devices operating from the battery • Connect the ring terminal of the sensor (1, Fig 1) directly to the Negative battery stud.
PAGE 4
2 YEAR LIMITED WARRANTY The Battery Temperature Sensor DC-BTS-A-C, manufactured by Samlex America, Inc. (the “Warrantor“) is warranted to be free from defects in workmanship and materials under normal use and service. The warranty period is 2 years for the United States and Canada, and is in effect from the date of purchase by the user (the “Purchaser“). Warranty outside of the United States and Canada is limited to 6 months.