Product manual

22
Below shows the steps of wiring.
Step1:Put the threaded sleeve and pressure screw through the AC wire (See figure 14).
Figure 14
Step2:Wire the AC wire refer to below instructions.
·Screw the green-yellow wire to the ground terminator in the AC Connector (Figure 15).
·Screw the blue wire to the N(Neutral) terminator in the AC Connector.
·Screw the brown wire to the L(Line) terminator in the AC Connector.
Figure 15 AC Connector
Step3: Confirm all the wires should be screwed down( Figure 16).
Figure 16
Step4: Screw down the threaded sleeve (Figure 17).
Figure 17