Specifications

SPS-500 Program Manual v1.26 Software Installation & SD Utilities  29
Aging wo/printer
any key or screen to end test at the completion of the
next test cycle.
Setup
Write MAC Addr Do not use.
MCR Set MCR to read track 1/2 or track ¾
Logo Define Insert SD card and touch screen to download printer
logo images. See “Downloading Logo Images for the
Internal Printer” on page 35 for more information/
Printer Density Set internal printer density: Low/Mid/High
Select KBD Select Flat/160 or Raised/90 keyboard (must match
hardware configuration.)
Power output Set serial port power to ON or OFF.
LCD B-Light Adj. Adjust front LCD back light intensity.
Update
Boot Update
Boot Update SD
Copy All
Copy All – SD
Copy zImage - SD
Do not use unless instructed. Instructions will
accompany operating system updates when or if
required.