Specifications

Sam4s SPS500 Programming Manual - 55 -
Barcode Format
The Register can produce Barcode Labels on the internal printer or a thermal printer that is physically
connected to the register. There are 20 possible print formats used to control height, width etc. The
labels can be printed from the PLU program menu, using an optionally displayed print barcode icon.
- In order to display the PRINT BARCODE icon on the PLU edit screen, set PGM Mode - System Options -
General Printing Options - 39. Enable Barcode Printing to YES
- The 20 barcode formats can be preset with the following print options from the PGM Mode - PLU – Self-
Print Barcode Format option.
- Program a valid EAN 8 or 13 barcode as normal. In the PLU program screen press the PRINT BARCODE
Icon, and select the format
(if no sizes have been set). The number of labels required for print is then entered.
Barcode Type# The Print Format No. 1–20
Barcode Height 0-255 Height from 1 to 255 max
Barcode Printer Port Port of the barcode printer
Print PLU Code This prints the PLU number
Print PLU Name This prints the PLU Name
Default Type
Where only one barcode type is to be used the type can be set as
default for speed of printing. The register will not then prompt to
select from 20 different formats.
Descriptor Format Name for user selection
Barcode Width 0-6 6 max for EAN8 - 4 max for EAN13
Feed Line Header Feed lines before printing
Print Price This prints the PLU price
Justification Print barcode Left/Right/Centre
PLU Edit Screen with Print Barcode Icon enabled.