Specifications

Sam4s SPS500 Programming Manual - 39 -
Unlock Procedures
This will reset any locked operational checks or clerk interrupt details. This must be performed on the
terminal set to store the data in the S-mode system option settings.
Check Unlock
Used in the unlikely event that an open check track number becomes
locked and inoperable
Clerk Unlock
Used in the unlikely even that an open clerk interrupt buffer becomes
locked and inoperable.
SRAM Backup
Used to backup and restore data to and from an SD card, also this option has the ability to send files to
the FTP, this menu option is shown in detail within the Report Mode chapter
Backup
This backs up the program to USB and SD Card in a folder called
\SPS500\BACKUP\customer name – as entered.
Restore
This restores program or report data.
Program data
The program data is restored from - \SPS500\BACKUP\customer name
Report Data
Previously saved reports can be restored to the memory of the SPS-500.
Report saving is advised whenever service activity or updates are required on
installed ECRs.
Save Report
This saves reports to the SD card.
All reports are saved simultaneously. Each
report is saved in .rpt format.
Reports are stored to Sps500/backup/store name/REP_mmddyyyy (000000 if no
storename used)
Multiple stores and multiple report dates can be stored on the device.