Specifications

- 16 - Sam4s SPS500 Programming Manual
Register Control
Message Explanation
Wrong Command The attempted command sequence is invalid for this operation
Wrong File Number
The file number accessed is incorrect, for example when sending program IRC.
This may be printed if two file sizes are not identical.
Wrong Itemiser
An attempt has been made to print a report for sales totals that do not exist,
E.g. an attempt to print a Z2 report when only Z1 has memory.
Under Tender Not Allowed
An attempt to pay the sale with a value less than the Subtotal has been made
against a tender key. Tender the exact amount or more than Subtotal
Over Tender Not Allowed
An attempt to pay the sale with a value greater than the subtotal has been
made against a tender key. Tender the exact amount or less than Subtotal
Check Tracking Error
An attempt to use 1 of the 4 check files failed, either the service mode option
has not been set for which register stores the check data, or within Reg the
check was opened using one check file type and stored on another type.
Using The check or clerk number is in use on another register.
PLU Not Allowed The PLU has been programmed as disallowed in this key sequence
Condiment PLU Not Allowed An attempt to sell a condiment PLU without first selling the main product
Non Condiment PLU Not
Allowed
The last PLU sold, was programmed to enforce the sale of a condiment PLU,
and the next product was not a condiment-flagged item.
Function Key Not Allowed The function key attempted is not allowed as part of this key sequence.
This Key Is Not Allowed An invalid key press has been attempted
X/Time Required The X/Time function is required during the current key sequence.
Invalid Authority Level The employee authority levels for the current operation is disallowed.
Time In Required
The register has enforced time clock entry before sales are made. The time
clock entry must be completed before sales can be made.
Sign On Required The register requires the entry of an employee number.
Memory Not Allocated The file attempted to be utilised has no corresponding memory allocation.
This Emp Rpt Must Be Cleared The employee report must be reset within the Z mode position
Error Status The program status of the attempted function or item is incorrect.
Error Value The value entered is not acceptable for this procedure.
Error System Option
The programmed system options are set incorrectly for the attempted
procedure. For example a check or clerk access has been attempted and the
register storing the data has not been set within the service mode options.
Error Employee
The employee number settings are incorrect for the attempted procedure, or
an attempt to change the employee mid operation has been made.
Error Table No The table number entered is not valid, enter an alternative table number
Promo Not Allowed The promotion key has been disallowed for the current product or procedure
Waste Not Allowed The wastage function key is not allowed during the current operation.
Decimal Entry Not Allowed An attempt has been made to use the decimal key incorrectly
Split Pricing Not Allowed
The multiplication key has the ability to carry out fractional entries, for split
pricing, this feature is not allowed during this current operation
Void Mode Is Deactivated Access to the void mode has been restricted in the program system options.
Tendering Is Not Allowed
Sale finalization using a tender key has been attempted however the procedure
is disallowed during the current operation.
Job Code Required An employee must be linked to a job code to use the time clock feature
Job Code Change not allowed The employee using the time clock is not allowed to change jobs.
Push Button Entry Required Employees must push a button and not use a code to sign on.