Specifications

- 130 - Sam4s SPS500 Programming Manual
Service Management
It is possible to install in additional memory into the register, as shown below.
Installation of Memory card
The register must be powered off
and disconnected from the mains. It is advisable to wear
protective gloves whilst installing the memory card.
- Open the memory card cover, and insert the memory card in the memory hole, as shown
Removing the Memory Card
- Unscrew the Memory card cover using a + shaped screw driver. Then open the memory card
cover and push the rounded area using a sharp object i.e. paper clip as shown in fig 2.
- The memory card, will be ejected as per fig 3