Specifications

Sam4s SPS500 Programming Manual - 11 -
Register Control
Paper installation - Single Printer Model
The single station printer uses an 80mm by 80mm thermal roll, which is fitted as shown.
- The printer cover is opened by pulling the Orange Cap Lever forwards
- The paper roll is inserted into the printer, with the leading edge of the paper over the printer.
- The printer cover is then closed and the paper locked in place.
Paper installation - Dual Printer Model
The dual station printer uses a 44mm by 80mm thermal roll, which is fitted as shown.
Receipt
- The printer cover is opened by pushing the Orange Cap Lever backwards
- The paper roll is inserted into the printer, with the leading edge of the paper over the printer.
- The printer cover is then closed and the paper locked in place
Journal
- The printer cover is opened by pushing the Orange Cap Lever backwards
- The paper roll is inserted into the printer, with a large leading edge of the paper over the printer.
- The printer cover is then closed and the paper locked in place
- The remaining paper is wound onto the spool, and the spool dropped into the holding grooves.