Specifications

Sam4s SPS500 Programming Manual - 127 -
Service Management
The Service Management menu can be used to carry out the following self test.
Self Test
- The Service Menu is accessed by powering Off/On the register, whilst pressing Cash then
pressing the Top Left, Bottom Left, Top Right, Bottom Right keys.
- The password 1287 ENTER is required, to access the main menu.
Display / Touch
This allows the following tests
- LCD test
- LCD Brightness
- Touch test
- Rear Display Test
- R LCD On / Off
- LED On/Off
Etc
This will test the following options
- Flash Memory
- SD Card
- Dallas Key
- MSR
- Drawer
- Printer
RTC
This tests the Real Time Clock
Keyboard
The keyboard, key positions and mode lock can be test using this option.
Printer
The printer option allows the following to be tested and adjusted
- Printer
- Cutter
- Pattern Test
- Reset Print Count
- Reset Cut Count
SD Card
The SD card slot located under the till roll cover, on the printer housing can
be tested using this option.
SRAM
This test will clear all memory
Check Bad
This option allows a Check for SMC Bad data
Age Testing
This checks all hard options