Specifications

- 10 - Sam4s SPS500 Programming Manual
Register Control
Control Lock
Turn the control lock to the REG position to operate the register.
Mode Operation
OFF The Register is in-operable
REG Used for normal registration
X
Used to Read register reports and perform other
manager functions
Z Used to Read and Reset register reports.
P Used to Program the register settings
S-MODE
Use for tests and special service mode settings.
This position is not marked on the control lock.
Control Keys
- There are two sets of keys that can be used to access the following control lock positions.
Key
Positions
REG OFF, REG
VOID VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z,
P VOID, OFF, REG, X, Z, P
C All Positions
Password
- The following password codes are available
Password Purpose
0000
No Password Or
User Defined
Report Passwords can be set in S-mode – System
options for each reporting period.
The password will be prompted for as the report is selected.
9999
The Manager Password can be set in S-mode – Password.
Function keys can be programmed to prompt for a manager
password when pressed. This prompt will not appear if the
operator using the function is flagged as a Manager.
In addition this code can be entered prior to pressing an
employee key, and program mode can be accessed without
previous knowledge of the employee sign on codes.