Specifications

- 104 - Sam4s SPS500 Programming Manual
Reports Menu
Report Menu Layout
There a two reporting modes
X – Display / Print without Resetting
Z - Display / Print and Reset
- Once an operator has signed on and
turned the key to the appropriate X
or Z position then the report menu is
shown.
- The required report type is selected
from the menu screen shown.
- Once the report type is selected, i.e.
Financial further reports are shown
for selection
- It is then possible to select the
Report Level 1 to 5 which
represents which periodic totaliser
the report is to be run for i.e.
1.Daily 2.Weekly etc
- If the system is running multiple
terminals, the IRC icon allows
selection of the required number of
registers.
- The report is displayed once
selected, and can be Printed as
required.
- For reset reports taken in the Z
position the sales, are cleared
when CLOSE is pressed