Specifications

- 100 - Sam4s SPS500 Programming Manual
Copy PLU Program
In order to assist with quick and efficient programming the system allows the copying of certain program
types, such as item groups. This eliminates the need for repetitive programming. The following files can
be copied, with the Copy PLU allowing the additional feature of field by field selection.
 Copy PLU
Used to copy the information held against an individual PLU to another saving time and energy on
repetitive programming. This can be done singularly i.e. one PLU to another or by enabling the
system flag PLU copy by range, from one PLU to a range of other PLU’s
 Copy PLU Status Group
Used to copy the information held against an individual PLU Program STATUS GROUP to another
range of groups. This saves both time and energy on repetitive programming.
 Copy Groups By Employee
This copies from one employee to another the 30 group numbers allocated for group by employee
reporting.
From PLU This is the PLU code from which items are to be copied
To PLU Range This is the Starting and Ending to which the from PLU data is to be applied
Between PLU #
This is the increment for the Starting and Ending Range i.e. if set to 5 and the
copy range is 1 to 20 then PLUs 1,5,10,15 and 20 will be copied with the
selected settings.
Select All This determines which fields are copied to the selected Range