Specifications

S-Mode Programming SER-7000 Program Manual

Serial Port Parameters Program Notes

FIELD Notes

BAUD RATE

Select 2400, 9600, 19200, 28800, 33600, 56000 or

OTHER from the pop-up window. (9600 is default.)

If you select OTHER, you may enter your own value.

PARITY

Select NONE, EVEN, or ODD from the pop-up

window; NONE is default.

DATA BITS

Select 8 or 7 from the pop-up window; 8 is default.

STOP BITS

Select 1 or 2 from the pop-up window; 1 is default.

LOGO SIZE (0-3)

Controls the size of bitmap image that may be printed

on the guest check.

LINES ON “HARD” SLIP

If hard check system is used, printing will stop on the

guest check after the number of print lines indicated

here is printed. Use this option to prevent over

printing when the bottom of the guest check is used as

a tear off receipt.

CUTTING AFTER

PRINTING?

Enables auto cutter if applicable.

IF PRINTER, KICK THE

DRAWER?

Allows printer to send the drawer kick signal.