Specifications

SER-7000 Program Manual P-Mode Programming
105
# FIELD Notes
16 OPEN ENTRY FOR SCALE
PLUS
If Y, amount entries are allowed for open
scale PLUs.
17 DEACTIVATE VOID MODE
Set to Y to deactivate any activity in the
VOID key lock position.
18 DISABLE TIME/DATE
PROGRAM
Set to Y to remove the ability to change or
reprogram the current date/time.
19 ALLOW PLU COPY BY
RANGE
If yes, the COPY PLU and COPY PLU
STATUS GROUP commands allow you to
copy statuses from a single PLU or GROUP
to a range of PLUs or GROUPS. If no, you
can only copy from a single PLU or STATUS
GROUP to another individual PLU or
GROUP. See “Copy Program” on page 191.
20 ALLOW POST TENDERING
Choose Y to allow tendering after the sale has
been finalized, for the purpose of computing
change
21 EMPLOYEE:
Y=POP UP/N=STAY DOWN
Choose Y to automatically sign off at the
completion of a transaction. Choose N to
register sales continuously for the same
employee.
22 EMP. SIGN ON
Select the method you wish to use when
signing on to operate the SER-7000: PUSH
BUTTON, SECRET CODE, EMPLOYEE#
or MCR. See “Employee Sign-On/Sign-Off”
in the SER-7000 Operation Manual for more
information.
23 QTY LIMIT FOR X/TIME
Determine the maximum quantity that can be
used for a multiplier.
24-
33
EMPLOYEE # LINKED
"EMPOYEE1" KEY
The 10 push button employee functions
(codes 41-50) can be used to sign on specific
employees. The specific employee for each
key is assigned here.
34 AUTO CLEAR ERROR
CONDITION
If Y, error conditions will clear automatically
after a momentary error tone and display of
an error message. You can continue with the
correct sequence without first pressing the
CLEAR key. If No, you must press CLEAR
to clear any error before continuing.
35 GUEST CHECK BALANCE
HALO (0=NO LIMIT)
You can place a high amount limit on the
balance that is stored in a tracking file. If