Specifications

- 83 - SER-7000
FUNCTION KEY - DEFINITIONS
%1 - %10 Ten discount/Premium keys are available to handle various types of
discounts, mark-downs and adjustments to items or transactions.
When using Smartcard categories %9 and %10 are used for
discounts & premiums
HALO / RATE For open keys this is the maximum amount, for fixed percent items it
is the rate to be applied
TAXABLE by RATE 1 - 6 The discount/premium amount can be included within the tax
FUNCTION IS INACTIVE This allows the items to be prohibited without the necessity to make
the key inactive
FUNCTION IS ACTIVE IN X ONLY This forces use of the X Manager Mode for operation
FUNCTION IS SALE / ITEM This determines whether the function must be applied to each item
or to the whole sale total after subtotal.
FUNCTION IS AMOUNT/PERCENT This determines whether the function will apply either a monetary or
a percent adjustment.
FUNCTION IS PLU’S / MINUS This determines whether the adjustment will be applied as either a
discount or addition.
FUNCTION IS OPEN/PRESET This determines the adjustment i.e. a pre-set rate or manual
COMPULSORY VALIDATION This forces validation (only on valid printers)
ALLOW PRESET OVERRIDE This enables the operator to manually enter an adjustment even
when there is a pre-programmed rate
PRESET OVERRIDE IN X ONLY This forces use of the X Manager Mode when it is necessary
override the pre-programmed amount.
FUNCTION NETS ITEM TOTAL This reports the values inclusive of the adjustment
I.e. 1.00 – 10% would report 90p
ALLOW MULTIPLE SALE COUPONS This enables more than one coupon operation per sale.
ALLOW DISCOUNT PER TRANS ? This restricts the operation of discount /premium added at subtotal
KEY IS DO IT DISCOUNT FUNCTION This operates a sale rounding system not used within the UK.
For example If a Sale if made for 7.20 and DO IT FUNCTION set
The sale value will be taken as 7.00 – the % cutting off the 0.20
PRICE INQUIRE Used to inquire on the retail price of a product this can be for single
item or multiple products
STAY DOWN/POP UP Price inquiry for Single item or for multiple items
PRICE LEVEL 1 – 20 Press a price level key prior to a PLU entry to shift the price of a PLU
to a different ‘price set’ pre-programmed to the PLU. Each product
has the ability to sell at four different prices. The prices are not fixed
however at price levels 1 through to 4, the Price level can be
allocated from any of the twenty to provide detailed price reporting
using the PLU by price level report (if set in memory allocation). The
norm for a bar is two prices normal and special offer price this
requires no special programming.
The terminal however can be programmed to used up to twenty price
bands. For example we could have some PLU’s using prices 1 – 4
representing sizes and some PLU’s using prices 6 – 10. This would
then representing different product types sold at different sizes;
pressing the appropriate price key will sell the correct size. Then
using the price level report, the analysis would show the total per
product. A breakdown of the price sales per product and an overall
sales total for all products per price level
ACTIVE IN X ONLY This forces the use of X Manager Mode for this key