Specifications

- 72 - SER-7000
GROUP – PROGRAMMING
Groups are designated to accumulate PLU sales for reporting analysis. A PLU can store sales information in
up to 3 groups.
Group Link #1 is set in PLU programming.
Group Links #2 and #3 are set in PLU Status Group programming.
This program allows you to set names to the groups that PLU sales will report to up to 99 groups
ADD TO GROUP TOTALS
This determines if the total sales for this category are to be included in the total of all group sales on the read
and reset analysis reports. It requires that only one of the three group that a PLU is linked to is included in the
group totals otherwise the figures will be inaccurate.
TAXABLE BY RATE FOR ANALYSIS 2
If this option is set when the analysis 2 function key is used in REG mode the taxable status of the item no
longer follows the normal PLU tax rate but is taxed at the rate programmed to this field
EXAMPLE GROUP STRUCTURING
PLU’s 1- 10 are DRAUGHT BEERS items
PLU’s 11 – 20 are MINERALS items both the above linked to PLU status group 1
BAR
Etc…
PLU’s 101 - 110 are STARTER items
PLU’s 111 – 120 are MAIN COURSE items both the above linked to PLU status group 2 FOOD
An analysis is required for each type of saleable product, also a total for the drink items and a total for food
items, with an overall restaurant sales total
The following programming method would provide that analysis.
GROUPS PROGRAMMING
1 - DRAUGHT BEERS linked to PLU’s 1– 10 using GROUP#1 field in PLU program
2 - MINERALS linked to PLU’s 11–110 using GROUP#1 field in PLU program
3 - STARTERS linked to PLU’s 101–110 using GROUP#1 field in PLU program
4 - MAIN COURSE linked to PLU’s 111 –120 using GROUP#1 field in PLU program
51 - DRINK SALES linked to 1 – BAR PLU Status group using GROUP#2 field
52 - FOOD SALES linked to 2 – FOOD PLU Status group using GROUP#2 field
76 - RESTRN TOTAL linked to 1 - BAR PLU Status group using GROUP#3 field
also linked to 2 - FOOD PLU Status group using GROUP#3 field
The group programming would be set so only groups less than 50 added into the group total i.e. all Draughts,
Minerals etc.. whilst groups greater than 51 would not be added to the group total, therefore ensuring the total
on the group sales read is always correct.
P
-
MODE PROGRAMMING MENU
1. PLU
2. PLU STATUS GROUP
3. GROUP
4. FUNCTION MENU
5. SYSTEM OPTION
6. TAXES
u ENTER PAGE UP/DN ↑↓
GROUP#
1 PROGRAMMING
DESCRIPTOR BAR AREA 1
ADD TO GROUP TOTAL ? Y
1 2 3 4 5 6
TAXABLE BY RATE FOR Y N N N N N
ANLAYSIS2
ESC Y/N ENTER PAGE UP/DN ↑↓←→