Specifications

- 30 - SER-7000

ERROR CLEAR PROCEDURE

The initial clear function allows you to exit any register activity and return to a beginning or cleared

state, any transaction in progress will be exited and totals for that transaction are not updated.

Here are some reasons you may want to perform an initial clear:

• The register is in an unknown state, and you wish to exit the current

program or transaction without following normal procedures.

• You have performed a function that includes a compulsory activity,

such as validating or printing, and you wish to bypass the compulsory

activity.

• An initial clear may be necessary as part of servicing, or

troubleshooting an SER-7000 register or system.

Contact your SAM4S dealer first if you have questions about operating or programming your SER-7000

TO PERFORM AN INIT CLEAR

• Turn the power switch located on the right side of the register to the

OFF position.

• Turn the key lock to the PGM key lock position.

• Press and hold the key position where the CASH key is located on the

default keyboard layout.

• Continue to hold the CASH key whilst turning the power switch to the

ON position.

• The P-MODE PROGRAMMING MENU will display when the initial

clear is complete.

SBTL

CHEQ

MISC

TND1

CASH

NOTE it may be required in some instances after a program init procedure to return to the REG position

and press a tender key to complete the procedure

TO INITIALIZE:

Press and hold this key position

during power-up in P-mode.