Specifications

- 22 - SER-7000
DISPLAY MESSAGES
SPLIT PRICING NOT ALLOWED
The multiplication key has the ability to carry out fractional entries, for split pricing, this feature is not
allowed during this current operation or has been disabled
VOID MODE IS DEACTIVATED
Access to the void mode has been restricted within the program system options.
JOB CHANGE REQUIRED
The current clocked on job code, is required to be changed using the time clock entry
JOB CODE CHANGE NOT ALLOWED
The job code change attempted during the time clock procedure is not allowed
PUSH BUTTON ENTRY REQUIRED
The employee sign on has been attempted without using the EMPLOYEE 1 – 10 push button functions.
TENDERING IS NOT ALLOWED
Sale finalization using a tender key has been attempted, however the procedure is disallowed during
the current operation.
OVER REGULAR HOURS PER WEEK
The employee time logged onto the system is over the predefined number of hours per week.
MUST <= LINE# PER TRANSACT
An attempt to enter the number of lines per check greater than the number of lines per transaction has
been made during memory allocation programming
MUST >= LINE# PER SOFT CHECK
An attempt to enter the number of lines per transaction less than the number of lines per check has
been made during memory allocation programming
NO STOCK PLU
The product selected for stock maintenance has not been defined as an inventory PLU within the PLU
status group settings
NEGATIVE CARD
It is not possible to enter a negative balance to the smartcard.
LINKED STATUS REQUIRED
The product requires a status group program setting.
RETURN TO THE X MODE
The current procedure must be finalized within X mode before changing the mode lock
ERROR – SLIP PAPER
The paper should be inserted into the external loose leaf paper printer before attempting this operation
LOCAL PRINTER REQUIRED
This procedure requires the programming of a printer physically connected to the register.
MODE ERROR
The mode lock key has been changed mid operation, return to the correct mode position
SET DATE & TIME IS DEACTIVED
The option to program the date and time has been disabled within the program settings
EMPLOYEE SHOULD BE DIFFERENT
The employee entered to complete the sequence should not be the same as the employee Signed on