Specifications

- 21 - SER-7000
DISPLAY MESSAGES
TIME IN REQUIRED
The register has enforced time clock entry before registration. The time clock entry must be completed
before sales can be made
SIGN ON REQUIRED
The register, requires the entry of an employee number
MEMORY NOT ALLOCATED
The file attempted to be utilised has no corresponding memory allocation.
THIS EMP RPT MUST BE CLEARED
The employee report must be reset within the Z mode position before continuing
ERROR STATUS
The program status of the attempted function or item is incorrect set, this must be re-programmed
before the item can be successful used.
ERROR VALUE
The value entered is not acceptable for this procedure
ERROR SYSTEM OPTION
The programmed system options are set incorrectly for the attempted procedure. For example a check
or clerk access has been attempted and the register storing the data has not been set within the service
mode options.
ERROR EMPLOYEE
The employee number settings are incorrect for the attempted procedure, or an attempt to change the
employee mid operation has been made.
ERROR TABLE NO
The table number entered is not valid during the present procedure, enter an alternative table number
SCALE MOTION
The attached scale, position should be checked
OVER WEIGHT
The item currently weighed is greater than the accepted weight
UNDER WEIGHT
The item currently weighed is less than the accepted weight
PROMO NOT ALLOWED
The promotion function key has been disallowed for the current product or procedure
WASTE NOT ALLOWED
The wastage function key is not allowed during the current operation.
DECIMAL ENTRY NOT ALLOWED
The decimal function is used for multiplication entries, an attempt has been made to use the decimal
key within an incorrect sequence.