Specifications
- 19 - SER-7000
DISPLAY MESSAGES
RANGE OVER
The number entered is out of range.
REMOVE PAPER
Validation is complete and the paper must now be removed.
SCALE FAIL!
The register is not able to find the scale.
SCALE REQUIRED!
This item requires a weight this may be entered either manually or automatically.
SEQUENCE ERROR!
The preceding key sequence is not allowed.
SINGLE ITEM!
This PLU has been programmed as a single item PLU and cannot be used within a sale.
SUBTOTAL REQUIRED
The SUBTOTAL key must be depressed before continuing.
SYSTEM ERROR
The register procedure attempted is not allowed, due to the fact the program code has not been set. For
example, opening of a check or clerk, where the service mode system option has not be set to
determine the register storing the sales data, correctly enter the required program codes.
TARE# REQUIRED
This PLU/scale item requires a tare (package) weight entry.
TRAY SUBTOTAL REQUIRED!
This prompt appears while in a TRAY SUBTOTAL transaction. The operator must first press the TRAY
SUBTOTAL key before pressing any tender keys.
VALIDATION REQUIRED!
This operation requires the valid function key to be pressed to complete the compulsory settings.
WASTE REQUIRED!
The operator is in the middle of a waste operation, and must depress the WASTE key in order to
complete the operation.
WRONG EMPLOYEE
The employee attempting to open this guest check is not the person who started the sale. Also appears
when attempting to sign on a new employee without first signing the current employee off, if overlap
employee is not programmed. Enter the correct employee code.
SIGN OFF REQUIRED
In order to complete this sequence the operator must sign off from the register.
ZERO AMOUNT
The register has been programmed to not allow negative sales.
PRICE LEVEL MISMATCH
The price level attempted in the sale, is not allocated to the PLU, check the price levels set against the
PLU programming
OVERRIDE NOT ALLOWED
The clerk has attempted a manual numeric entry such as manual PLU price, but has been disallowed
within the system settings program option.