Specifications

- 146 - SER-7000
BITMAP FILE DOWNLOAD
The register operates two types of bitmaps, those download by the PC to the register and printed on the
internal receipt printer and those stored within the external printer.
It is possible to store the images directly to the external printer, however if the printer is changed the images
are lost. Using this program option (requiring memory allocation settings) it is possible to download the
external printer images to the register and then transmit them to any printer.
If a the images are graphical logos for receipt header message the relevant printer driver settings are
changed within service mode to under the logo section. For example the SRP350 Image would be changed
from 1D2F to 1C7XXX where XXX is the image number.
Alternatively an image number can be programmed to the PLU status group and any products within group
can be selected to print the image at sale.
Note: Ensure the printer is physically connected the terminal and in a ready state.
BITMAP FILE DOWNLOAD
PORT#1
PORT#2
PORT#3
PORT#4
PORT#5
PORT#6
PORT#7
Press ENTER on
the correct port # to
download the
bitmap image
P
-
MODE PROGRAMMING MENU
25. PLU & WLU KEY RELOCATION
26. BITMAP FILE DOWNLOAD
27. GROUPS BY EMPLOYEE
28. SMARTCARD CATEGORY
29. ADD/REMOVE HOT LIST
30. CARD MAINTENACE
u ENTER PAGE UP/DN ↑↓