Specifications

88
x
P-Mode Programming SER-7000 Program Manual
Modifier 1-10
FUNC. KEY #136 PROGRAMMING
DEFAULT DESC : MODIFIER1
DESCRIPTOR : MODIFIER1
ACTIVE IN X ONLY N
MODIFY DESC ONLY(NOT PLU#) N
PRINT DESC ON GUEST CHECK Y
PRINT DESC ON RECEIPT Y
ESC Y/N ENTER PAGE UP/DN
npom
FUNC. KEY #136 PROGRAMMING
PRINT DESC ON KP Y
AFFECT DIGIT 1-14 OF PLU# 00
VALUE OF AFFECTED DIGIT(0-9) 0

ESC Y/N ENTER PAGE UP/DN
npom
Modifier Key Program Notes
FIELD Notes
AFFECT DIGIT 1-14 OF
PLU#
Preceding a PLU with a Size and/or Modifier key
manipulates the PLU code assigned to the PLU key,
causing a different PLU to be registered when the PLU
key is pressed. Enter the digit of the PLU number you
wish to be changed when using this key. (Digit #1 is
the rightmost digit; digit #14 is the leftmost digit.)
VALUE OF AFFECTED
DIGIT (0-9)
Enter the value you wish to be added in the digit
position selected. For example, if you wish to affect
PLU digit #4 with a value of 1, then pressing this
modifier key prior to the registration of PLU #17 will
result in the registration of PLU #1017.