Specifications

SER-7000 Program Manual P-Mode Programming
x
63
PLU Program Notes
FIELD Notes
DESCRIPTOR
Enter a descriptor up to 16 characters in length. Note
that the method you use to enter the descriptor depends
upon your selection for General Function Option #12
(see “General Function Options” on page 57.)
x The default method is by using the Alpha Keyboard
Overlay. Type the descriptor using the typewriter-
style keyboard on the overlay.
x If Alpha Code Entry is selected as an alternative,
type the codes representing each character, see
“Entering Alpha Characters” in the “Getting Started”
chapter for a list of alpha codes.
GROUP LINK #1
Enter the primary reporting group for the GROUPS and
PLU BY GROUP reports.
x There are 99 groups available for reporting.
x If you wish to assign a PLU to more than one
reporting group, assign the PLU to a PLU STATUS
LINK# that contains the necessary assignments for
GROUP LINK #2 and GROUP LINK #3. (See
“PLU Status Group” on page 38.)
PLU STATUS LINK #
The status link group contains the remainder of the
configurable options for this PLU. See "PLU Status
Group" on page 38.
PIECE COUNT
Enter a value in this field if you wish to use Product
Mix and Product Projection reporting. The number of
units entered here will be reflected in product mix
reporting.
x See “PLU Status Group” on page 38 to select
product mix items for this PLU item.
x See “Product Mix Groups” on page 57 to set up
product mix items and time periods.