Specifications

S-Mode Programming SER-7000 Program Manual

WLU Key Relocation

This process accomplishes two purposes:

x It changes the assignment of a key location to a WLU key. You can change an

existing Function key or PLU key into a WLU key by selecting any key on the

keyboard in this program.

x It assigns the WLU number that is displayed when this WLU key is operated.

The WLU # assignment for a WLU key can also be set in P-Mode. See “PLU

and WLU Key Assignment” in “P-Mode Programming”.

1. Press any key to read

and/or change the

current assignment, or

press ESC to exit.

WLU KEY RELOCATION PROGRAMMING

KEYBOARD LEVEL 1

x PRESS ANY KEY TO READ AND/OR

CHANGE CURRENT ASSIGNMENT

x PRESS ESC TO EXIT

WLU KEY RELOCATION PROGRAM

KBD LEVEL : 1 KEY POS. : 1

CURRENT WLU#: 01

KEYCODE#013 ADD CHECK

ESC ENTER

2. Type the WLU

number you wish to

be displayed when

this WLU key is

pressed. Press

ENTER to assign the

number, or press ESC

to exit without

changing the current

assignment.

The current function and

descriptor for this key are

displayed here.