Specifications

SER-7000 Program Manual S-Mode Programming
x
41
PLU Key Relocation
This process accomplishes two purposes:
x It changes the assignment of a key location to a PLU key. You can change an
existing Function key or WLU key into a PLU key by selecting any key on the
keyboard in this program.
x It assigns the PLU number that is registered when this PLU key is operated.
You can also assign the PLU registered for a key in P-Mode. See “PLU and
WLU Key Assignment” in “P-Mode Programming”.
1. Press any key to read
and/or change the
current assignment;
or press ESC to exit.
PLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL 1
x PRESS ANY KEY TO READ AND/OR
CHANGE CURRENT ASSIGNMENT
x PRESS ESC TO EXIT
PLU KEY RELOCATION PROGRAMMING
KBD LEVEL : 1 KEY POS. : 1
CURRENT PLU# 00000000000001
PLU1
ESC ENTER
2. Type the PLU
number you wish to
be registered (up to
14 digits) when this
PLU key is pressed.
Press ENTER to
assign the number, or
press ESC to exit
without changing the
current assignment.
PLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL 1
x PRESS ANY KEY TO READ AND/OR
CHANGE CURRENT ASSIGNMENT
x PRESS ESC TO EXIT
KEY POSITION 13:
OLD=PLU# 0000000000001
NEW=PLU# 0000000000002
3. The old and new
assignments for the
key you have just
p
rogrammed display.
Continue to program
additional PLU key
locations by pressing
another key.