Specifications

SER-7000 Program Manual P-Mode Programming
x
207
Employee Card Read Format
EMPLOYEE CARD READ FORMAT
1. READ TRACK1

2. CARD ID 0000000000
3. CHECK CARD ID N
4. COLUMN OF CARD ID
START 00
DIGIT 00
ESC Y/N ENTER PAGE UP/DN
npom
1. Select EMPLOYEE
CARD READ
FORMAT from the
P-MODE
PROGRAMMING
MENU to display the
EMPLOYEE CARD
READ FORMAT
Screen.
EMPLOYEE CARD READ FORMAT
5. COLUMN OF NUMBER
START 00
DIGIT 00

ESC Y/N ENTER PAGE UP/DN
npom
Employee Card Read Format Program Notes
FIELD Notes
READ
Set to the Track (1 or 2) that you wish to read.
CARD ID
If ID numbers are to be used, enter the ID number (up
to 10 digits) from the magnetic cards that will be
accepted. If ID numbers are not to be used, ignore
this field.
CHECK CARD ID?
Enter Y to use card ID numbers, or N if you do not
wish to use card ID numbers.
COLUMN OF CARD ID
Enter the number of the column that the Card ID starts.
CARD ID DIGITS
Enter the number of digits to be read for the Card ID.
COLUMN OF NUMBER
Enter the number of the column that the Card number
starts.
CARD NUMBER DIGITS
Enter the number of digits to be read for the Card
number.