Specifications

SER-7000 Program Manual P-Mode Programming
x
203
PLU Key Assignment
This process assigns the PLU number that is registered when a PLU key is operated.
1. Press any PLU key to
read and/or change
the current
assignment, or press
ESC to exit.
PLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL 1
x PRESS ANY KEY TO READ AND/OR
CHANGE CURRENT ASSIGNMENT
x PRESS ESC TO EXIT
PLU KEY RELOCATION PROGRAM
KBD LEVEL : 1 KEY POS. : 1
CURRENT PLU# 00000000000001
PLU1
2. Type the PLU
number you wish to
be located at this PLU
key position. Press
ENTER to assign the
number, or press ESC
to exit without
changing the current
assignment.
PLU KEY RELOCATION PROGRAMMING
KEYBOARD LEVEL 1
x PRESS ANY KEY TO READ AND/OR
CHANGE CURRENT ASSIGNMENT
x PRESS ESC TO EXIT
KEY POSITION 1:
OLD=PLU# 0000000000001
NEW=PLU# 0000000000002
3. The old and new
assignments for the
key you have just
p
rogrammed display.
Continue to program
PLU key locations as
necessary by pressing
another key.
4. Press ESC to exit.
At the prompt:
EXIT? [Y] press
ENTER.
5. At the prompt:
SAVE KEY
RELOCATION? [Y]
press ENTER, or
press the Y/N key,
then press ENTER to
exit without saving
changes.