Specifications

SAM4S NR-500 Series Manual Service Mode Programming • 95
ECR Setup
1. From SERVICE MODE, press 6 and CASH for ECR SETUP screen
displays:
ECR S ETUP
1.RO M I NFO
2.PR I N T DEN S I TY
3.LC D C ONTR A S T
2. Press the key and the key for selecting value. Press CASH to confirm
the option value and return menu.
Print Density
1. From ECR SETUP menu, press 2 and CASH to program ‘PRINT DENSITY’
screen:
P R I NT D E N S ITY
(DENS I T Y LE V E L:1-3 ) 2
2. Press the key and the key for selecting value. Press CASH to confirm
the density level and return to the ECR SETUP menu.
LCD Contrast for Customer Rear Display (Two Line)
1. From ECR SETUP menu, press 3 and CASH to program ‘LCD
CONSTRAST’ screen:
2. Press 1 and CASH key for Customer Rear Display (Two Line).
3. During check Customer Rear Dipslay press the key and the key to
change constrast. Press CASH to confirm and return to the ECR SETUP menu.
LCD Contrast for Opeartor Display (Multi Line)
1. From ECR SETUP menu, press 3 and CASH to program ‘LCD
CONSTRAST’ screen:
2. Press 2 and CASH key for Operator Display (Multi Line).
3. During check Operator Display press the key and the key to change
constrast. Press CASH to confirm and return to the ECR SETUP menu.