Specifications

94 • Service Mode Programming SAM4S NR-500 Series Manual
RS232C Settings Screen Program Notes
Option Description
BAUD RATE
Select 1200, 2400, 4800, 9600, 19200, 38,400,
57,600, or 115,200 from the screen, 9600 is default.
PARITY
Select NONE, EVEN or ODD, NONE is default.
DATA BITS
Select 8 or 7 from the screen, 8 is default.
STOP BITS
Select 1 or 2 from the screen, 1 is default.
DEVICE FUNCTION
Select NONE, PC, PRINTER, SCANNER or POLE
from the screen, NONE is default.
PRINTER TYPE
Select the printer type connected to this port.
KP START LINE (0-20)
Enter the number of KP START LINE.
KP END LINE (0-20)
Enter the number of KP END LINE.
SLIP START LINE (0-20)
Enter the number of SLIP START LINE.
USB Setting
1. At the SERVICE MODE, press 5 and CASH for DEFINE PORT.
2. From the DEFINE PORT screen, press 3 and CASH for USB TYPE.
3. Press the key and the key to select usb type and press the CASH key to
confirm
USB T Y PE
DEVIC E : M E M ORY
MEM O R Y
Note: If you select other types, Your NR-500 series will be rebooted by itself.
USB Specifications
USB TYPE USB VERSION SPEED
PC-COM For connecting PC - -
SCANNER For using scanner
USB 2.0
(only HID type)
FULL SPEED
MEMORY For backup & restore USB 2.0 FULL SPEED