Specifications

78 • Manager Mode (X Mode) SAM4S NR-500 Series Manual
Flash Report
You can view flash report on screen.
1. Press CASH to display the X MODE.
2. From the X MODE menu press 3 and CASH to display the FLASH REPORT.
The cash drawer opens.
R E PORT T OTALS
GROSS S ALES 0.00
NET S A L E 0.00
CASH- I N -D 0.00
CHECK - I N-D 0.00
FD/S- I N D-D 0.00
CHG1- I N -D 0.00
3. At the FLASH REPORT screen, press key to view previous page and
key to view next page.
Training Mode
A training mode is available so that the register can be operated (to practice registrations)
without updating totals and counters. If you choose to use training mode, you must set a
training mode password (see “TRAIN MODE” of the “Options Programming” in the
"Program Mode Programming" chapter.)
Note: If you make registrations to check tracking numbers in training mode,
remember that the check tracking total will be updated. Remember to pay, or clear
the check file (CLOSING MODE menu/Z REPORT/TABLE) before resuming
normal operations. You must close all open checks prior to entering training mode.
1. Press CASH to display the X MODE menu.
2. From the X MODE menu press 4 and CASH to enter or exit training mode:
SET T R A IN M O D E
START : 1 / E N D :0
3. The START TRAIN screen displays. To start training mode, type your
password and press CASH.