Specifications

26 • Getting Started SAM4S NR-500 Series Manual
6. The SERVICE MODE menu displays. The RAM Clear procedure is complete and
the receipt prints.
7. If you want to allocate memory by default value, Press CASH key only.
LOAD D E FAUL T SET
N=X/T I M E Y = C ASH
Or press X/TIME key to allocate by yourserf. And follow the On-screen prompts.
ALLOC A T ION
PLU #
(180 – 6000 )
1000
8. If you want to finish memory allocation, press CASH key until LCD display “ARE
YOU SURE?” message. And if you want to allocate memory area again, press
CLEAR key. Repeat the allocation sequence.
DEFAULT Memory allocation Specifications
ALLOCATION ITEM DEFAULT MAX
PLU 1000 6000
CLERK 10 99
GROUP 10 99
PRICE LEVEL 1 2
MIX AND MATCH 20 100
EJ LINE 1000 15000
CHECK# 10 500
SOFT CHECK LINES 50 100
CHECK TYPE 0 SOFT(0) / HARD(1)
Memory Allocation Information
1. From the SERVICE MODE screen, select ALLOCATION menu and Press
CASH if you want to scan memory allocation.