Specifications

164 • Program Mode Programming SAM4S NR-500 Series Manual
Employee Programming
1. At the PROGRAM MODE menu, press 5 and CASH for EMPLOYEE.
The CLERK NUMBER screen displays:
EMPLO Y E E
ENTER C LERK #
(1-10 ) 0
2. Press the clerk number and CASH.
3. Press the key and the key to select menu and press the CASH key to confirm. You
can also select menu by page key and page key. Select the Employee option
you wish to program.
4. Press the key for YES and the key for NO. Press the CASH to
confirm the option value and return previous screen.
5. Press the CLEAR key to finalize and return to the ENTER CLERK# screen.
Clerk Programming - Reference Information
Option Entry Description
NAME Alpha
numeric
24 character
You can program a descriptor for each clerk. The name
you program will print on the receipt in place of the default
CLERK #1-99. Type the descriptor using the Program
Overlay or by using the descriptor code method (see page
114.) The overlay is automatically activated when the
cursor is pointing at the DESC field.
PASSWORD 6 digit
number
If you are using a direct or code entry clerk system. The
number you set here is the number you must use to sign on
or clock in/out. If using an optional card reader, you must
swipe the employee card at this field.
TRAIN CLERK Y or N
Set to Y if you wish to be train clerk.
ALLOW X
MODE
Y or N
If Y, you can use X mode.
ALLOW Z MODE Y or N
If Y, you can use Z mode.
ALLOW P MODE Y or N
If Y, you can use P mode.
ALLOW S MODE Y or N
If Y, you can use S mode.
ALLOW VOID
MODE
Y or N
If Y, you can use VOID mode.