Specifications

162 • Program Mode Programming SAM4S NR-500 Series Manual
Option Entry Description
SEND ONLY
NEGATIVE ENTRIES
TO E.J.
Y or N
If the electronic journal is enabled above, select Y if
you wish to capture only transactions with negative
entries.
SEND RESET REPORT
TO E.J
Y or N
If the electronic journal is enabled above, select Y if
you wish to capture reset reports.
E.J PRINTING NEW
OLD
NEW: Prints electronic journal from lowest
consecutive number to highest.
OLD: Prints electronic journal from highest
consecutive number to lowest.
E.J PORT (0-2) 0-2 Choose a port for a remote printer to print electronic
journal reports instead of the register printer.
PRINT SMALL FONT
EJ REPORT
Y or N
Select Y to print small font on EJ report.
TRAIN MODE options
Option Entry Description
OPEN DRAWER IN
TRAIN MODE
Y or N
Select N if you do not want the cash drawer to open
during training mode operations.
PRINT TRAIN MODE
TITLE
Y or N When in training mode, the message "TRAIN
MODE" normally prints on each receipt. Select N if
you wish to delete this message.
SEND TO KP IN
TRAIN MODE
Y or N You can choose whether to print or not print
registrations in training mode on kitchen requisitions.
PRINT JOURNAL IN
TRAIN MODE
Y or N
Select Y to print on the detail printer in train mode.
TRAIN P/W 6 DIGIT If you wish to use training mode, you must program a
password that you will use to enter training mode.
The password may be up to 6 digits.
PRT TRAIN CLERK
START/END MESSAGE
Y or N Select N if you do not wish to print a message of train
clerk start or end.