Specifications

148 • Program Mode Programming SAM4S NR-500 Series Manual
Macro Key Programming
Macro keys may be programmed to record, and then later perform, up to 50 keystrokes.
For example, a macro key could be set to tender (preset tender) a common currency, such
as 5 into the cash key. Use this program to record keystrokes for each of the 10
possible macro keys.
1. From the PROGRAM MODE, press 3 and CASH for FUNCTION KEY.
The FUNCTION KEY PROGRAM screen displays:
FUN C T ION K E Y
1.FUN C T ION K E Y
2.MAC R O KEY
2. From the FUNCTION KEY screen, press 2 and CASH for MACRO. The
MACRO PROGRAM screen displays:
MACR O KEY
ENTER M ACRO K EY
TO BE P ROGR A M MED
3. Press the macro key(MACRO1 – MACRO10) that you wish to program.
The screen diplays Macro descriptor. Press the CASH key to make macro line.
MA C R O1
MACRO 1
M A CRO1
4. The screens displays the first macro line:
MAC R O 1
ENTER F UNC. K E Y
1:
5. Press the first key of the macro sequence, Type up to 50 key stokes. For
example, press 5 (numeric five): and CASH.
MAC R O 1
ENTER F UNC. K E Y
2: C ASH
6. Press the same MACRO key to end the sequence.
7. Continue to program additional MACRO key sequence or press CLEAR key
to return to PROGRAM MODE screen.